1, all the nozzle is equipped with straw (tube length is about 23cm, there is a 1-3cm error).
2, the nozzle applies to the standard 2.5cm standard bottle mouth (
3, about acid and alkali resistance is OK, but some solvents can dissolve corroded plastic parts are very durable. For example, the head water can directly corrodes the plastic parts, if used, it is also necessary to clean the residual solvent in the nozzle, and the solvent can not be soaked in the nozzle. This greatly shortens the service life of the nozzle.
4, strong acid and alkali, also need to spray water after use. Can not let the strong acid and alkali have been soaking the plastic parts inside the nozzle. Otherwise the life of the nozzle will not be too long.
5, all the nozzle can spray atomization effect, the water spray mouth to tighten, clockwise adjustment, special nozzle to screw especially tight, slightly loosen a little to achieve the best spray effect, try to adjust.