AlveyTech 1" Internal Diameter Pillow Block & Bearing (Set of 2)

<p>Our 1" internal diameter (ID) pillow block and bearing comes as a matching set of two, complete with self-aligning double sealed chrome ball bearings, a cast iron housing, set screws, and grease fittings. Pillow blocks may be used to mount axles as well as a huge range of industrial applications, making them ideal for custom go-karts, trailers, and other projects where robust strength are required.</p>
<p>Note: Self-aligning bearings are adjustable. Simply mount the blocks, insert the axle or shaft through both, then tighten the set screws. There may be a bit of tolerance or play but this is by design to facilitate getting the bearing axis parallel.</p>
<p>Please refer to the photos and the specifications to determine whether these pillow blocks are just what you need.</p>
<p>Specifications</p>
<p>Length: 8.07" (205 mm)</p>
<p>Height: 2.79" (71 mm)</p>
<p>Width of base: 1.49" (38 mm)</p>
<p>Internal bearing diameter (axle or shaft diamete)r: 1" (25.4 mm)</p>
<p>Distance between mounting hole centers: 4.13" (105 mm)</p>
<p>Mounting bolt diameter: 3/8" (M10)</p>
<p>Maximum RPM: 3400</p>