About this item
【EASY OPERATION】Rating: 275A DC Continuous (1hr), 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec); Stud Size: 2x5/16" (8mm); Switch on = Power; Switch off = No power. Recommend to install on the negative side of the battery (lower current in negative, will be more safety)
【DURABLE MATERIAL】This battery master switch is made of durable plastic housing, tinned copper studs and nuts. Come with 4 stainless steel mounting screws and caps to help fix the switch tightly. Removable rear cover insulates the rear terminals against any short circuits. 4 Removable side plates provided access for battery cables
【COMPATIBLE】This battery disconnect switch is used for DC 12 - 48V systems to isolate and secure the electrical system, can stand alone or be locked together with other switch, simple and economical way to separate batteries
【NO MORE BATTERY DRAIN】This battery isolator switch provides a reliable way to shut down electrical power during maintenance and protect batteries from excessive drain when vehicle or boat is not in use
【WIDE APPLICATION】This battery kill switch is widely used for Car, Marine, Boat, RV, Camper, Travel Trailer, Truck, ATV, UTV, Battery banks and other electrical equipment's switch, such as flashing light, chassis light, fog light, dome light
Specification:
2 Position: On Off
Voltage: 12V-48V
Rating:
275A DC Continuous (1hr)
455A DC Intermittent (5 min)
1250A DC Cranking (10 sec)
Terminal material: Tinned copper
Terminal Diameter: 2x3/8" (M10)
Package Include:
1 x Battery Switch
4 x Removable Side Plate
1 x Rear Cover
4 x Screw
4 x Nut
About this item
Operation: 1-2-both-off, 4 position, 200A DC Continuous (1hr), 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec); Voltage: 12V-48V DC; Stud Size: 3 x 5/16" (8mm), 3 mounting screw holes (8mm diameter) for 8-10MM screw connection (not included mounting hardware).
The patented contour locking system, allowing it to be a stand alone unit, or locked together with other switches to isolate and secure the electrical system, offers a simple economic way of separating two batteries.
This battery cut shut off kill switch has four removable side plates. The rear cover insulating the rear terminals against any short circuits. Equipped with 4 sets of bolts.
Tin-plated copper studs and nuts; Ignition-protected. ABS plastic housing, durable made for safety use.
Widely used for Car, Marine, Boat, RV, Camper, Travel Trailer, Truck, ATV, UTV, Battery banks and other 0 up to 60V Devices.
Specification:
4 Position: 1-2-Both-Off
Rating:
200A DC Continuous (1hr)
455A DC Intermittent (5 min)
1250A DC Cranking (10 sec)
Voltage: 12V-48V DC
Stud Size: 3 x 5/16" (8mm)
Package Include:
1 x Battery Switch
4 x Removable Side Plate
1 x Rear Cover
4 x Screw
4 x Nut