DESCRIPTION:
AUTOOL BT360 Car Battery Load Tester is dedicatedly developed to test 8-20V regular flooded, automotive lead-acid batteries, AGM flat plate, AGM spiral, GEL, and EFB batteries. It provides techs with a quick, simple and cost-effective solution to know the battery's charging status better , check the battery's health and detect faults.
Caution：
When doing a battery test, please make sure the car is off .
[Multi-Functions]：
Battery test
Cranking test 
Charging test
Additional functions include: Set language, voltmeter and screen brightness adjustment.
AUTOOL BT-360 Battery Tester includes :Battery test, Cranking test, Charging test functions. Mainly targeted to analyze the battery healthy status. 
It directly detects whether the battery is good or bad, and present suggested solutions.
[Professional & Reliable]：
Test standards include most battery standards in the world, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB, which covers from 20- 2000 CCA, 2-300 AH.
[Multi-language Support]：
10 Languages are available.Available in English, Spanish, German, French Russian, Polish, Chinese, Dutch, Russian and Japanese. Other languages can be customized. 
There are two versions:
 
Version 1.languages with English,Spanish, German, French,Russian, Italian
 Version 2.languages with English, Polish, Chinese, Dutch , Japanese
[3-YEARS WARRANTY]：
For damage caused by non-human factors, we promise to resend parts for free within 3 years. 
For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
[Efficiency & Safety]：
Using advanced conductive technology, it can directly display the high accuracy results of vehicle info. 
Deigned with polarity reverse connection protection,reverse connection will not damage the tester or affect the vehicle and battery.
Three Functions Test Operation Steps of AUTOOL BT360 Car Battery Load Tester
Step 1. Connect the 12V battery, red clips to positive pole and black clips to negative pole.
Step 2. Battery Test: Firstly select the type of battery to be tested, then the test criteria and the test range, and then you have the results within few seconds.
Step 3. Cranking Test: After selecting the cranking test function, follow the prompts to start the engine.  Test completed.
Step 4. Charging Test: After entering the charging test function, follow the prompt to increase the speed to 2500 RPM for 5 seconds, then press OK. Test completed.
Technical Parameters
Cold Cranking Amps Measure Range:
Measure Standard       Measure Range
CCA ----  20-2000
JIS ----    26A17-N200Z
DIN ----   20-2000
IEC ----   20-2000
EN ----    20-2000
SAE ----  20-2000
GB ----    2-300Ah
BCI ----   20-2000
MCA ---- 20-2000
CA ----    20-2000
Working Environment Temp: -20°C-50°C
System voltage: 12 Volts
Input voltage range: 9V~15V
Packing List:
1pc* AUTOOL BT360 Car Battery Load Tester
2pcs* Full copper core kelvin clip
1pc* Manual