Battery Disconnect Switch
Material: Plastic
[Manual and Remote Control] This isolation switch allows you to switch off the power to your car battery via remote control, avoiding the car battery being drained by long periods of parking, aged wiring and forgetting to switch off the lights. Maximum storage of car battery power. In addition, thieves can't start and steal your car, increasing security
[Auto Power Off] When the battery voltage is lower than 11.8V, the remote arc extinguishing switch will automatically cut off the power after 120 seconds to save power; when the voltage is higher than 13.5V, the remote control will be disabled to avoid accidental power off while driving, and can only be controlled by manual switch
[Low Power Consumption, Stable] Battery Disconnect Switch Operating Temperature: -22℉~194℉ , Standby Power Consumption: 3mA, Rated Current: 240A, Rated Voltage: 12V, Power Failure Threshold: 11.8V±0.2V, Instantaneous Current: 500A
[Easy Installation] The battery cut-off switch adopts the negative connection method, easy installation, stable performance, note: be sure to switch off the power supply before installation, and carry out ignition test after installation.
[Widely Used] This disconnect switch is suitable for most 12V cars, boats, RVs, trailers, trucks, ATVs, UTVs, motorbikes, vehicles with displacement less than 4.0; Negative: 9-13mm and 15-17mm, not applicable to small stakeheads. Note: The size of the switch is 3.3x2.4x1.4inch, it's better to check and measure your car's battery compartment to see if there is enough space to install it and close the hood correctly before purchasing
Notes:
1. It's better to check and measure your car's battery compartment to see if there is enough space to install it and close the hood correctly before purchasing.
2. Be sure to switch off the power supply before installation, and carry out ignition test after installation.
Blue style Parts List:
1 x Cut-off Switch
2 x Remote Control
1 x Instruction Manual
Size: 8.5 x 6 x 3.5CM
 Black style Parts List:
 2 x Copper Nut 2 x Battery Clip 1 x Copper Nose 2 x Remote Control 1 x Antenna 2 x Connecting Cable 2 x Brass Gasket
Working voltage: 12V
Working current: 200A
Instantaneous current: 500A