Fitment:
Universal style, as long as the size is appropriate, it can fit almost all vehicles
Note:
- Wrong size for chrysler 300c 2007
- Wrong size for BMW 2008 328xi
- Not for Audi A5 Quattro 2011 Cabriolet - Convertible 2-Door 2.0L 1984CC 121Cu. In. l4 GAS DOHC Turbocharged Hyundai i30n 2023
- Not for INFINITI G37 2009 Sport Sedan 4-Door 3.7L 3696CC V6 GAS DOHC Naturally Aspirated
Specification:
Material: Rubber
Size: About 135cm, can DIY length to fit your car
Color: Carbon Fiber/Glossy black
Package Included:
1pcs x Car Rear Wing Sticker
Attention:
Measure the length of the rear wing of the car and cut the product according to the length of the rear wing;
1. Simulated installation
Don't tear off the adhesive first, place the product on the car and compare and adjust it to the accurate position.
2 Surface treatment
(1) Cleaning
Use a towel dipped in alcohol or clean the vehicle body with clean water in the area that needs to be installed.
(2) Precautions
Before installation, the vehicle body must be kept dry and free of dust, oil, and wax. When the temperature is below 15 degrees Celsius, it is necessary to heat the adhesive on the vehicle body and product. (Heating with a hair dryer is sufficient)
(3) Installation
Tear off a corner of the protective film on the back of the product, leave the film on the outside to match the installation position, and then slowly remove and press the film.
(4) Protection period
Within 48 hours after the installation of the product (at the adhesive position), it should not come into contact with water, oil, or large dust
Note:
1.Please allow some color and measurement errors due to manual and monitor factors.