MrCartool Universal Easy Intake Adapter Diagnostic Tool Quick Seal Entrance adap

MR CARTOOL T130 Car Smoke Leak Detector Oil Pipe Leak Locator EVAP System Smoke Leakage Tester Exhaust Gas Analyzer Tool For Car
USD 211.39-276.00/piece
MRCARTOOL T130 Car Smoke Leak Detector Tester Oil Pipe Leak Locator Car EVAP System Smoke Leakage Analyzer For Car Workshop Tool
USD 367.69-460.00/piece
MR CARTOOL T105 Automotive Smoke Machine Tester Dual-Modes Car EVAP System Leak Fuel Leakage Detector Smoke Generator For Cars
USD 132.59-180.28/piece
MRCARTOOL T100 Smoke Machine Leak Detector Automotive Exhaust Gas Analyzer Car EVAP Gas Leakage Locator Oil Pipe Smoke Generator
USD 167.69-198.46/piece
MRCARTOOL T105 Car EVAP System Smoke Leak Tester Fuel Leakage Detector Generator For Cars Dual-Modes Automotive Smoke Machine
USD 213.85-290.77/piece
Description：
'Quick Intake universal intake adaptor' is an inflatable block off bladder with a pressurized vapor pass-through that allows technicians to test an entire intake or exhaust systems quickly and easily. It can be used with any brand of smoke machine or diagnostic leak detector to reduce workload on a leak check.It's suitable to any shape of intake / exhaust: Round, oval, square, rectangular and even severely angled and hard to reach intake / exhaust systems, while allowing vapor to pass through for fast diagnostics.
Universal inatake Adapter:
100% fit all cars and light trucks;
Quick seal intake/exhaust easily;
Fits any shape of intake/exhaust,like round,oval,square,rectangular and even severelly angled and hard to reach.
Quick Start Instruction:
1. Clean the inner wall of the intake opening while the Air Filter, and the Throttle connections are removed,so as  not to scratch the adapter.
2. Close the Pressure Relief Valve(A) next to the Hand Pump(B).
3. Put the Rubber Component(C) into the intake opening.
4. Inflate the Rubeber Component(C) by pressing the Hand Punm(B) till the intake opening is tightli sealed.
5. Now the system is ready to test,introduce air/smoke into the system by plug the smoke nozzle into the Tube  Opening(D).
6. After test,pull off the smoke nozzle,release the inflated air by open the Pressure Relief Valve(A) next to the  Hand Pump(B).
7. Clean the adapter for storage,avoid contact with corrosive liquids.
Packing List：
1pc * Air Intake Bladder