Universal Easy Intake Adapter Diagnostic Tool Quick Seal Entrance adapter Adapte

Universal adapter tool (suitable for all smoke equipment on the market) 100% suitable for all cars and light trucks.
  The overall customized silicone material is thicker by 1.5mm (stronger than other products on the market).
 Attention please:
 1. Inflate is to seal the air inlet, it can still function as normal even if the inflated airbag is not a perfectly round one.
2. Please check if the inlet/exhaust diameter is greater than2"Universal Quick Inlet AdapterThe Quick Inlet Universal Adapter is an inflatable block outside the bladder with a pressurized vapor passage that allows technicians to quickly test an entire inlet or exhaust systems.Universal "Quick In" inlet adapter can be used with any type of smoke machine or diagnostic leak detector to reduce the workload in a leak check."Quick inlet" bladder block conforms to any shape of inlet/exhaust: round, oval, square, rectangular and even severely angular and hard to reach inlet/exhaust systems, while allowing steam to pass for quick diagnostics.Compatible with any smoke machine, "Quick Entry" fits 100% of automobiles, from passenger cars to heavy duty trucks, to quickly test the integrity of the entire induction system with one simple procedure.
Universal inatake adapter:Fit most cars and light trucksQuick seal entry/exhaust easilyReduce workload on a leak checkFits any shape of inlet/exhaust (diameter greater than 2") : round, oval, square, rectangular and even severelly angular and difficult to reach inlet/exhaust systemsWork with any type of smoke machine or diagnostic leak detectorsQuick
Start Instruction:
1 Clean the inner wall of the inlet opening while the air filter and throttle connections are removed so as not to scratch the adapter.
2 close the pressure relief valve (a) next to the hand pump (b).
3 Place the rubber component (c) into the inlet opening.
4 inflate the rubeber component (c) by pressing the punm of the hand (b) until the inlet opening is sealed tightli.
5 now the system is ready to test, introduce air/smoke into the system by plugging the smoke nozzle into the tube opening (d).
6 After testing, remove the smoke nozzle, release the inflated air by opening the pressure relief valve (a) beside the hand pump (b).
7 clean the storage adapter, avoid contact with corrosive liquids.