BA101 Professional 12V 100-2000 CCA 220AH Automotive Load Battery Tester Digital Analyzer Bad Cell Test Tool for Car/Boat/Motorcycle and More

$69.88

  • Brand: AutoMaximizer
  • Availability: In Stock
  • SKU: c3bb8712-e3d0-439d-802a-b5a4bcbed1bb
  • Barcode: 313098651635

Small compact design, faster scanning and direct display of test results. Even a beginner can analyze any 12 volt battery with this device. It shows you everything about the battery: Voltage, charge, starting power and remaining battery life (ohmic resistance level). And it does it quickly and accurately. Much wider test range (100-2000 CCA) and more accurate than its competitors....

Tags: Automotive , Battery Testers , Diagnostic , Test & Measurement Tools , Tools & Equipment

  • Small compact design, faster scanning and direct display of test results. Even a beginner can analyze any 12 volt battery with this device. It shows you everything about the battery: Voltage, charge, starting power and remaining battery life (ohmic resistance level). And it does it quickly and accurately.
  • Much wider test range (100-2000 CCA) and more accurate than its competitors. Test results are based on JIS, EN, DIN, SAE, CCA, BCI, GB, CA, MCA and IEC standards.
  • Provides an opportunity to check the charging status of the alternator and the starter. Vehicle charging system test is also available, including load voltage, unloaded voltage, ripple status and charging system status.
  • The BA101 Battery Tester is well built and features a large LCD display with white backlighting and adjustable contrast that shows test results directly. No internal batteries are required and power is drawn directly from the 12V battery.
  • It comes with a 3. 0-foot cable and is made of a very thick, flexible insulator that is much safer than others on the market. There are 4 buttons on the BA101. The up/down button is used to scroll through the menu. The Enter and Exit buttons are used to navigate back and enter the menu.

Product Description

The ANCEL BA101 can be used to test a wide range of 12V batteries including Starting, Lighting, and Ignition (SLI), Deep Cycled and Marine (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM), and GEL cell. The major battery standards JIS, SAE, EN, DIN, and IEC are supported. BA101 12V car battery tester can easily, quickly and accurately measure the actual cold cranking amps capability, the health status of the battery itself, and the common fault of the vehicle's starting system and charging system.

The BA101 Advantages:

  • Simple and easy to use
  • Tests batteries on and off the vehicle
  • Accurate results in milliseconds
  • Battery life analysis
  • Analysis results: Good or Replace
  • Large easy to read LCD screen
  • Test results based on JIS, EN, DIN, SAE and IEC Standards
  • Quick test - inputs battery volume (AH), then shows battery status
  • Vehicle cranking system test - cranking time, voltage and status
  • Store the testing result and the print function
  • Vehicle charging system test—load voltage, unloaded voltage, ripple status, and charging system status

BA101 Functions:

  • Test Results: Good or Replace
  • Internal resistance value (m)
  • Life in percentage (%)
  • Cranking system
  • Charging system
  • Operating Parameters:
  • System voltage: 12 Volts
  • Input voltage range: 9V~15V
  • Power requirements: No internal batteries required
  • Capacity: Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating

Five Different Results of Battery Testing
  • GOOD BATTERY:The battery is without any problem.
  • GOOD, RECHARGE:Good battery but low current, and recharge before using.
  • REPLACE:The battery is already at or near the end of its use life, and please replace the battery.
  • BAD CELL, REPLACE:Battery interior damaged, bad cell or short circuit, and replace the battery.
  • CHARGE-RETEST: Unstable battery shall be recharged and retested to avoid error.

Is the battery good or does it need to be replaced?

It tests the battery's CCA (or AH) value, charge (%), voltage (v), internal resistance (Ω), rated, and battery health (%), etc. After a comprehensive analysis of the data, it provides an accurate assessment of whether a battery is good or needs to be replaced. The test result is shown directly by text prompt, giving an accurate display of the battery with percentage and numerical values.

  • Conductance correlates directly to the battery capacity.
  • The passive testing method is safe.
  • Never discharges or drain the battery.
  • Able to test the condition of the discharged battery.
  • Consistent and repeatable results.
  • It provides a unique indication of battery conditions.
  • Powers up when connected to the battery posts during testing.
  • It provides checking the Alternator's charging and Starter's cranking conditions. It is maintenance free and no internal batteries required.

Multiple Battery Standards Support

  • It can test by AH and CCA values but also applies to other test standards such as BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
  • If your battery standard is AH standard, you can input the AH value to test in the "Quick Test" menu.
  • If your battery is CCA or another standard, please input the CCA or other value to test in the "Battery in Vehicle" or "Battery out of vehicle" test menu.

Fast and Accurate Reading

  • It adopts the world's most advanced conductance testing technology to date for accurate and authoritative test results.
  • It quickly analyzes the data, usually taking 2-3 seconds to display the results.
  • Easy to use, it can quickly and accurately identify battery problems.

Print Data Steps

  1. Before using the print data function, it is necessary to connect the tool to a computer via the USB cable. Once ready, please insert the CD to the computer.
  2. Install the USB driver first.
  3. Open the print software, and choose the COM Port NO.
  4. Then choose the function of print data to start printing.
Test Voltage 12V 6V/12V 12V 12V/24V 12V/24V 12V/24V
Application Check & Analyze 12V Lead-acid Battery Check & Analyze 6V/12V Lead-acid Battery Check & Analyze 12V Lead-acid Battery Check & Analyze 12V/24V Lead-acid Battery Check Automotive Electrical System For Diagnostic Cummins, Volvo, Paccar, Detroit, Perkins Trucks, etc
Test Range 100-2000CCA 100-2000CCA 100-1100CCA 100-2000CCA 12V/24V Source 12V/24V Source
Battery Standards Supported AH, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE CCA, CA, MCA, JIS, DIN, IEC, EN, SAE CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB 4 working modes: DC/AC voltage/Resistance/Diode Supports all system scans of heavy duty trucks
Test Cranking System Cranking time, voltage and status Cranking time, voltage and status Test regular flooded, AGM flat plate, AGM spiral, GEL battery Storage battery test,Maximum load system test Continuity test/Activate components/Voltage & polarity/Signal circuit test etc. Read/Clear Fault Codes/Restrie Vehicle informations
Test Charging System Load voltage, unloaded voltage, ripple status, charging system status Load voltage, unloaded voltage, ripple status, charging system status Test result: SOH, SOC, CCA value, CCA rating, voltage, internal resistance, etc. Engine system activation load test, Charging system test Feature red/green polarity indicators, follow & locate short circuit, check bad Ground contacts View Free Fram/DTC Lookup
Real-time Voltage Waveform Features "Quick Test" with AH value Testing trailer lights and connections Viewing live data in a text or graphic format for trucks
Print Data Built-in thermal printer Circuit breaker protection
Internet Update 20 feet extension cord

You can add, text, html, images and videos as well to the tab from product settings area

Recently Viewed Products

$69.88