BT705 24V 12V Car Battery Tester Battery Load Tester Alternator Automotive 100-2000 CCA Auto Cranking Charging System Checker Digital Battery Analyzer for Heavy Duty Truck Boat Motorcycle

$179.83

  • Brand: AutoMaximizer
  • Availability: In Stock
  • SKU: cad022fe-ebf3-406d-9bfc-1b48be2a1998
  • Barcode: 744110561449

【24V 12V BATTERY CHECK ANALYZERS】 EDITORIAL RECOMMENDATIONS Batteries Tester. FOXWELL BT705 auto battery life testers designed for 12 V or 24 V batteries with a capacity of 100 to 2000 CCA, such as regular flooded, AGM flat plate, AGM spiral, GEL and deep cycle batteries, 12V & 24V starting and charging system. The test results based on JIS, EN, DIN,...

Tags: Automotive , Battery Testers , Diagnostic , Test & Measurement Tools , Tools & Equipment

  • 【24V 12V BATTERY CHECK ANALYZERS】 EDITORIAL RECOMMENDATIONS Batteries Tester. FOXWELL BT705 auto battery life testers designed for 12 V or 24 V batteries with a capacity of 100 to 2000 CCA, such as regular flooded, AGM flat plate, AGM spiral, GEL and deep cycle batteries, 12V & 24V starting and charging system. The test results based on JIS, EN, DIN, SAE, CCA, BCI, GB, CA, MCA and IEC Standards.
  • 【CAR BATTERIES DOCTOR】 Adopt the advanced conductance testing technology, the premium quality copper clip and wire maintain a stable communication all throughout the testing process to provide you with reliable results! Accurately and quickly measure the actual cold cranking amps, capability of the vehicle starting battery and healthy state of the itself. Test results are not limted to SOH, SOC, CCA , current, rating, resistance, no-load & loaded voltage, charging ripple value, etc.
  • 【CRANKING & CHARGING SYSTEM TEST】 BT705 car battery testers displays the decision on the starter system, cranking voltage and cranking time in milliseconds. Also, the battery diagnostic scan tool can check 12 volt or 24 volt vehicle electronic system’s charging condition to make sure the output voltage of the generator is in a regular condition, the rectifier diode works fine and the charging current is a normal status.
  • 【WORTH TO OWN】 You need to know how much life your batteries have left. BT705 hybrid battery cca tester can accurate reading of battery health status in just 3 seconds in its large and easy to use backlit LCD display, help you diagnose and resolve battery health problems timely without disconnecting the battery or using a separate battery. It is widely for cars, suvs,mini-vans, trucks, marine boats, motocycle, trackors or other devices which equiped in 12v or 24v batteries.
  • 【EXTRA-SAFE OPERATION】Different from other vehicle battery alternator testers, our FOXWELL BT705 digital car battery load tester for all batteries was equipped with 100% high-quality safety copper clip, which has reverse polarity protection and spark-proof function, which can achieve stable and safe connection during the test. Plus, the small and compact FOXWELL battery load analyzer can be easily stored in our additional carrying case.
  • 【AN ESSENTIAL BATTERY TEST TOOL & GREAT GIFT】FOXWELL BT705 automotive battery capacity tester will come with a hard protective case which made of high impact strength matrial, easy to carry and storage. 7.8ft cable allowed you to do the test from inside or outside of the vehicle, whether you own your personal mechanic shop, garage, dealer or private owner, you’ll fall in love with this battery voltage analyser! A good choices for gift to your father, brother, grandpa, uncle and etc.
  • 【PAY ATTENTION PLEASE】Please make sure that both contacts of the positive and negative clips are in good contact to get right values. More details, please refer to the Installation Manual(PDF) which located in the Product guides and documents menu of Product Page.

Product Description

The automotive battery diagnostic test tool from FOXWELL aims to analyze battery issues and battery-rated system issues. BT705 battery analyzer is dedicatedly developed to test 12 volt regular flooded, AGM/EFB flat plate, AGM/EFB spiral and gel batteries, start-stop AGM/EFB battery with a capacity of 100-2000 CCA. It detects the failure of the starting and charging systems in 12V & 24V cars, SUVs, Sedans, Mini-Vans, light duty trucks, pickup trucks, marines, boats, motorcycles and even lawnmowers etc. Most devices issues caused by the batteries can be fixed with FOXWELL BT705. It provides a quick, easy and affordable solution for technicians to check battery health and detect faults of starting and charging system. It is a professional battery tester for enthusiasts or DIYers, small garages, auto repair shop, independent repairs etc.

What Can Be Done with FOXWELL BT705 Digital Auto Battery Analyzer?

  • Battery heathly monitor: Check the cold cranking capability and the aging status of the battery. It informs the user to replace battery before the battery is getting aged.
  • Battery charging system test: Judge the health of an alternator by testing the car's charging system(12V&24V) and avoid damaging the battery because of overcharge or incomplete charge. BT705 load tester can detect the change in battery voltage to indirectly determine the alternator's condition(works or not works), but it cannot test the alternator directly.
  • Cranking system test: Make sure the output voltage of the generator is in a regular condition. Detect if the generator/ rectifier diode provides sufficient power to the vehicle electrical system, and if the battery can hold the charge.

Features:

  1. Wide battery coverage: Test 12V 24V batteries rated from 100CCA to 2000CCA. Battery types: Regular flooded, AGM flat plate, AGM spiral, GEL and EFB.
  2. Diagnoses multiple rating system: CCA, CA, MCA, JIS, DIN, IEC, EN, SAE.
  3. Tests the batteries on the car directly- no need to remove the battery.
  4. Battery health check, cranking & charging system test. Tests start-stop AGM and EFB batteries.
  5. Test result: Check the battery's healthy staus but limited to SOH(State of Health), SOC(State of Charge), CCA value, CCA rating, voltage, internal resistance etc.
  6. Quick and accurate test result: Quick starter analysis without disabling the ignition, display in just 3 seconds, accurancy up to 99.99%; display suggestion according to the testing results (Good, Recharge, Replace), detects bad cells directly.
  7. Ripple voltage test for easy and intuitive check of faults.
  8. Polarity reverses connection protection: Does not emit light, heat or spark ,or discharge battery-keeps operation safe for all levels of users. Automatic temperature compensation.
  9. Deserve to own: Extremely easy to use with 2.8” large backlight LCD display and menu-driven operation. Rubberized sleeve protects, 7.8ft tester cable with metal alligator clips.

FOXWELL BT705 12V 24V 100-2000CCA Automotive Battery Tester

  1. Test regular flooded, AGM flat plate ,AGM spiral, GEL and EFB batteries which standard is CCA,BCI,CA,MCA,JIS,DIN,IEC,EN,SAE,GB.
  2. CCA- Cold Cranking Amps, as specified by SAE. The most common rating for cranking batteries at 0°F (-18°C).
  3. BCI- Battery Council International standard.
  4. CA- Cranking Amps standard. The effective starting current value at 0°C (32°F).
  5. MCA- Marine Cranking Amps standard. The effective starting current value at 0°C(32°F).
  6. JIS- Japanese Industry Standard, shown on a battery as a combination of numbers and letters. Test range is 26A17--245H52.
  7. DIN- Deutsche Industrie-Norm.
  8. IEC- International Electrotechnical Commission.
  9. EN- Europa-Norm.
  10. SAE- Society of Automotive Engineers.
  11. GB- China National Standard.

Vehicle Battery Analysis

  • GOOD BATTERY: Battery is in good condition.
  • GOOD-RECHARGE: Battery is in good condition but low current.
  • CHARGE & RETEST: Fully charge the battery and retest. If you still get CHARGE & RETEST after fully charge the battery, replace it.
  • REPLACE BATTERY: The battery is almost dead or the connection between the battery and battery cable is poor. Replace the battery and retest; or disconnect the battery cables and retest the battery using the out-of-vehicle test. BAD CELL-REPLACE:The battery may be damaged.

The battery life tester keeps the results of last test only. When you start a new test, the last results are overwritten.

Alternator Charging System Analysis

NO PROBLEMS: System is showing normal output from the alternator.

NO OUTPUT: No alternator output detected. Check all connections to and from the alternator, especially the connection to the battery. If the connection is loose or heavily corroded, clean or replace the cable and retest. If the belts and connections are in good working condition, replace the alternator. (Older vehicles use external voltage regulators, which may require only replacement of the voltage regulator.)

LOW OUTPUT: Alternator not providing sufficient to power the system's electrical loads and charge the battery. Check the belts to ensure the alternator is rotating with the engine running. Replace broken or slipping belts and retest.

Vehicle Cranking Analysis

  • CRANKING NORMAL: The starter voltage is normal and the battery is fully charged.
  • LOW VOLTAGE: The starter voltage is low and the battery is fully charged.
  • CHARGE BATTERY: The starter voltage is low and the battery is discharged. Fully charge the battery and repeat the starter system test.
  • REPLACE BATTERY: Battery must be replaced before the starting system can be tested.
  • NO START: No vehicle start detected.
  • CRANKING SKIPPED: A start was not detected.

Note: Before starting the test, inspect the alternator drive belt. A belt that is glazed or worn, or lacks the proper tension, will prevent the engine from achieving the rpm levels needed for the test.

Advanced Technology

Euipped in FOXWELL unique smart chip which makes BT-705 battery system analyzer provide a accurate testing result in just 3 seconds. The experimental results showed that our FOXWELL BT705 12v 24v voltage meter provided more than 99.99% precise testing reports within just a few seconds, greatly improved the testing speed and accuracy.

More Safe & 7.8ft Test Cable

The all-copper spray gold clamps does not only provide short circuit protection and spark proof protection, but also built-in automatic protection against reverse polarity, which ensure the safety of you and the battery tester. The battery analyzers equipped with a 7.8ft long test cable which allows you to do the "Start" and "Load Tests" from inside of the vehicles.

Plug and Play, Easy to Understand

Connect the positive and negative of battery terminals and test, no need extra power supply. FOXELL BT705 digital battery tester supports both in-vehicle and out-of-vehicle test. No need to remove the battery out of vehicle. Operation is very simple, you do not even have to read the instructions, the alternator tester itself prompts you the next step and get the testing result.

FOXWELL BT705 12V 24V Battery Tester--Keep your Automotive in a Full of Energy Status at Any Time

The battery cca tester was packed in strong box which made of high impact strength material. With this protection carrying case, you can prevent your car battery tester from being damaged whether you place it in a trunk, toolbox, or garage. It fits right in the palm of your hand, making it an excellent addition to your tool box.

Application Check battery status, cranking voltage, cranking time, charging test, alternator decision OBD2 Diagnostic All Cars Diagnose all systems for BMW/MINI/Rolls Royce before 2022 Diagnose all control modules, Engine/Transmission/SRS/ABS/Chassis/SAS/DPF/TPS/ESP/Suspention/Headlamp/Air condition/immobilizer.... OBD2 Diagnostic All Cars Active Tests, Diagnose all systems with 30 Service Reset,Oil/EPB/TPS/SAS/TPMS/Injector/ABS Bleeding/Battery Registration Advaned Software/Hardware
Diagnostic Systems Batttery Check ABS, SRS, Airbag, SAS Support Body, Chassis, Powertrain Check, and all Control Modules all available systems/ 5 Hot Reset Service/ Up to 60+ Car Makes OBD2; Turn off MIL; Auto VIN Scan; DTC Lookup; Read and clear engine fault codes, help you pass the annual Emission Inspection for all cars all available control modules
All OBDII Diagnosis
Advanced Functions Battery Test ABS Bleeding/ ABS Auto Bleed/ Reset ABS/SRS/ Calibrate SAS Read/clear MIL, ABS, Airbag, Throttle/oil light/EPB service, SAS Calibration, TPMS, ABS bleeding, transmission, Battery Registration/Replacement, ect. ABS Bleeding/SAS Calibration/Throttle Matching/Oil light/EPB reset. Deactivation and activation of the brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement on EPB systems. 30 service reset: ABS Auto bleeding/Oil light reset/EPB/SAS/D-P-F/TPS/TPMS/Battery Registration/gear learn/Injector/CVT/A/F adjust/clutch adaption/PRIME fuel pump/seat match/turbo/windowsdoor and etc
Bidirectional Control/Active Test ABS Manual Control Tests, ABS Motor Test ,ABS Version Test ,Actuator Tests,Autobleed Test, Service Bleed ,Automated Test ,Brake Bleed Preparation Test ,Function Test ,Gear Tension Relief Test,Idle Up Manual Control Test ,Lamp Tests,ect. ABS Manual Control Tests, ABS Motor Test ,ABS Version Test ,Actuator Tests,Autobleed Test, Service Bleed ,Automated Test ,Brake Bleed Preparation Test ,Function Test ,Gear Tension Relief Test,Idle Up Manual Control Test ,Lamp Tests,ect. Commonly-Used Actuation Tests include: Operate Mirros,Cycling A/C Clutch On/ Off,Cycling ABS Pump Motor,Open/Close the Sunroof,Turn On/Off the Fuel Pump/Sound Horn/radiator fan/interior & exterior lights and etc
Print Diagnostic Data
Life-long Updates 18 months

You can add, text, html, images and videos as well to the tab from product settings area

Recently Viewed Products

$179.83