Supplies power and ground Digital voltmeter with min/Max voltage capturing 4mm banana jack 20 foot power lead Tests for bad grounds and continuity Product Description At Power Probe, we believe things should be simple. That’s why we design tools to make complex automotive technology accessible for the modern auto technician. As automotive technology continues to evolve, Power Probe will provide...
Tags: Circuit Testers , Electrical , Testers , Tools & Home Improvement
At Power Probe, we believe things should be simple. That’s why we design tools to make complex automotive technology accessible for the modern auto technician. As automotive technology continues to evolve, Power Probe will provide innovative Technology, Energy, and Knowledge solutions for technicians and consumers alike.
By Power Probe
Prepare to leave your other tools on the bench. Once you connect Power Probe tools to your car battery you will have access to an amazing variety of diagnostic functions.
What does it do?
With the press of a switch you'll have an instant hot lead or ground lead. Use the probe tip and ground lead simultaneously to power up components right in your hand. Instantly check components for continuity as well as identify positive, negative and open circuits without re-polarizing hook-up clips. Locate shorts without wasting fuses.
Power Probe 3 manual
The PP3 is a Voltmeter and Continuity Tester, with Audible & Visual indicators along with two LED headlights to light up your work area. This circuit tester also supplies Battery Voltage or Ground to activate components. The housing is sleek and feels great in your hand. This powerful time-saver tool is perfect for every level of technician.
While the PP3 is in Power Probe Mode. Contact the probe tip to a NEGATIVE circuit. The green negative sign “-” LED will light. If the audio feature is turned on, a low pitched tone will sound.
While the PP3 is in Power Probe Mode, contact the probe tip to a POSITIVE circuit. The red positive sign “+” LED will light and the voltage reading of the circuit will be indicated on the LCD display. If the audio feature is turned on, a high pitched tone will sound.
1. Connect the PP3 to a good battery.
2. Clip the auxiliary ground clip to the trailer ground.
3. Probe the contacts at the jack and then apply voltage to them. This lets you check the func-tion and orientation of the connector and trailer lights. If the circuit breaker tripped, that con-tact is likely a ground. Reset the circuit breaker by letting it cool down (15 sec.) and depress-ing the reset button until in clicks into place.
|Voltage Rating||12-24 VDC||12-24 VDC||12-24 VDC||9-30 VDC|
|Display Type||1 Line LCD Display||Color Multi-Line LCD Display||Color Multi-Line LCD Display||Color Multi-Line LCD Display|
|Circuit Breaker||Manual Reset||Manual Reset||Self-Resetting||Self-Resetting|
|DC Voltmeter||0 – 70 VDC||0 – 70 VDC||0 – 200 VDC||0 – 200 VDC|
|DC Min/Max||Min & Max||Min & Max||Avg, Min, Max Simultaneously||Avg, Min, Max Simultaneously|
|AC Voltmeter||0.1 to 70.0 VAC (Peak-Peak)||0.1 to 70.0 VAC (Peak-Peak)||0.01 to 199.9 VAC (RMS or Peak-Peak)||0.01 to 199.9 VAC (RMS or Peak-Peak)|
|AC Min/Max||No||No||Avg, Min, Max Simultaneously||Avg, Min, Max Simultaneously|
|Ohmmeter||No||No||0.1 to 10K ohms||0.1 to 10K ohms|
|Frequency (HZ)||No||No||1Hz to 9999Hz/PW||1Hz to 9999Hz/Duty%/PW|
|Injector/Driver/ECT Test Mode||No||No||Yes||Yes (Display Waveforms)|