🔥【Charger, Maintainer & Desulfator】 - An all-weather battery charger, battery maintainer, trickle charger, and battery desulfator. Perfect for charging and maintaining all 12-volt lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell). ETL safety standard Listed. 🔥【Automatic Desulfation & Optimization】 - Automatic detection of battery sulfation problem. Applying with pulse current technology to desulfate the batteries effectively. Optimize...
MOTOPOWER is the registered brand of MOTOPOWER INC. We are the direct factory specializing in the eletrical products and accessories for automotive and powersports industry, such as battery chargers, battery testers, cell phone chargers, cables and more. All the products are designed, produced and sold directly by MOTOPOWER. We control all the progress from the very beginning material purchase to the final shipment to customers, so as to ensure the products quality and the customer satisfactory. You can get the best products here at the most competitive cost directly from MOTOPOWER stores on Amazon.
Low-Voltage Activation & Recovery
Pulse current applied for batteries between 4 - 8volts. Increase the battery voltage gradually to optimize the cells and restore their best performance.
Force pulse current in the absorption stage to desulfate the cells. Removing the troublesome crystals and absorb into the charge cycle.
Maintain at 13.6volts Indefinitely
Maintain the battery with float current close to 0.1 - 0.5amp and keep the battery at 13.6V+/-0.2V indefinitely. Restart charging when voltage drops.
Five CHARGING STAGES - Diagnosis, Soft Start, Bulk Charge, Absorption and Float/Maintenance. Bring the batteries to back to life.
Energy-Save & Safety
No output without load. No battery drain when connecting with battery. Spark free for safety.
Sulfation detection and repair cells damage. Optimize the battery chemistries.
Stable performance for any climate. Low temperature activation.
24-hour absorption/desulfation. Stop automatically when fully charged or when time's up.
The MOTOPOWER MP00205A 12V 800mA Battery Charger allows you to connect the charger to the battery and leave it for maintenance indefinitely.
Once the battery has reached a 100% charge, the chargers will automatically switch it's output voltage to a safe, storage/float level (13.6V+/-0.2V) that eliminates the need to worry about the damaging effects of overcharging.
Pulse Current Recovery Mode:
In the Absorption Mode, the charger will give a 0.5Amp pulse current to charge and recover the battery until it's fully charged. In this stage, the charger will decrease the battery sulfation and improve the battery performance gradually. For several times charging, you will find the battery internal resistance is lower and the performance is improved.
- Input Voltage: 100-240V AC / 60Hz. - Output Voltage: 12 Volts DC @ 800mA - Charged Voltage: 14.2+/-0.2 Volts
- Maintenance Voltage: 13.6+/-0.2 Volts - Activate Voltage: 4Volts ( Do not suggest charging dead batteries )
- Battery Charger x 1 - SAE Alligator Clamp Cable x 1 - SAE Eyelet Terminal Cable(7.5A fused) x 1 - Instruction Manual x 1
|Battery Voltage||12V||12V||12V||12V||6V & 12V||12V|
|Charging Current||800mA||800mA||1.5Amp||2Amp||2Amp & 4Amp||1Amp|
|Short Circuit Protection||✓||✓||✓||✓||✓||✓|
|Reverse Polarity Protection||✓||✓||✓||✓||✓||✓|
|Battery Repair||Pulse current recovery||Pulse current recovery||Pulse current recovery||Pulse current recovery||Repair Mode||Pulse current recovery|