P100 Pro Power Circuit Probe Kit, 9V-30V Automotive Circuit Tester 12V 24V AC DC Digital Voltage Tester, Multimeter Short Finder with Oscilloscope Component for Cars Truck
$132.51
Power Probe Master Kit is an essential tool for automobile user. It is needed for testing components on and off the vehicle, checking for the good and bad grounds, testing for continuity and diagnosing circuit failures. If the vehicle owner keeps it in his car he can check system failure on his own way no need to go to technician....
Tags: Circuit Testers , Electrical , Testers , Tools & Home Improvement
- Power Probe Master Kit is an essential tool for automobile user. It is needed for testing components on and off the vehicle, checking for the good and bad grounds, testing for continuity and diagnosing circuit failures. If the vehicle owner keeps it in his car he can check system failure on his own way no need to go to technician.
- [P100 Pro Circuit Tester]: The P100 Pro is the generation intelligent electrical system circuit tester with 2.4 inch large size LCD screen display. It's dedicated to test all 9v-30v vehicle electrical systems. Not only can test the voltage and ground signals in the DC circuit, but also provide ground function, 0-5v power supply and activate test components, multimeter mode & oscilloscope mode, allowing you to more conveniently and quickly test the automotive electrical system.
- [Quickly Test]: With this Automotive Circuit Tester kit, intelligent test identification of voltage value, resistance value and positive and negative polarity, grounding detection, poor line contact, Short circuit tracking and positioning, continuity test, signal circuit test, etc. can be performed. Accelerates diagnosis and troubleshooting of automotive power circuit problems.
- [0-5V Power Supply]: Our car automotive diagnostic test tool has a 0-5v power supply function that other common Circuit Test tools do not have. It can simulate the voltage output by the sensor (0-5v can be adjusted incrementally), so as to verify whether there is a short circuit or fault in the ECU circuit.
- [Component Activation]: Power probe master with a 20ft cable is able to connect the vehicle battery without jumper cables and power and test the functionality of components such as lights, radiator fans, starters, relays, power windows, windshield wipers and more. (Note: Activation mode is designed for power supply only and cannot be used for any sensitive electronic equipment (such as ECU, sensor module, SRS (airbag) system), otherwise there is a risk of burning out components.)
- [Digital Multimeter Mode]: Circuit tester automotive contains common parameters of conventional multimeters, which can be used to detect voltage, current, resistance, diode, frequency in DC circuit system. Car Circuit Tester displays various values on a high-definition digital screen, which greatly improves the ease of operation, readability and convenience.The top of the Power Circuit Probe test tool has two LED lights designed to light up the work area in the dark.
Product Description
P100 Pro Circuit Tester Kit
includes multi-meter functions, advanced diagnostic test modes, an easy to read color LCD display and a rugged water and dust resistant housing.
Main Features
- Intelligent identification of voltage/resistance
- Multimeter mode (measure voltage, resistance, diode)
- Oscilloscope function
- Activation of vehicle components
- 0-5V adjustable power supply
- Signal frequency & duty cycle
- Network online upgrade
- Built-in 14 languages
Technical Specifications
- Display: 2.4 inches (320*240 DPI) TFT true color display
- Working temperature: 0-60°C (32-140 F°)
- Storage temperature: -40-70°C (-40-185 F°)
- External power supply: 12V or 24V powered by battery
- Working voltage: 9V~30V
- Measuring voltage: 0.1V~100V
- Resistance measurement range:1 ohm~200K ohm
- Current measuring range: 0~18A
- Max continuous current: 18A
- Color: black/red/orange/yellow/green/blue
Upgraded MultimeterTo use the multimeter mode, you need to press the button to switch the test mode, and the LCD will read the DC voltage (VDC), resistance (OHM), diode/continuity test (DIO) | Oscilloscope Powerful FunctionsUse an OBD2 Scanner to read out the FAULT CODE(DTC) from the vehicle and found the problem is with some kind of sensor circuit, there is a fast way to test the sensors conditions with this probe | 0-5V Power Supply0-5V power supply mode is designed as an active mode, but the function is different from the component activation mode. It can adjust the voltage output under 5V and limit the current under 100mA. (This is safe to avoid burning out electric components). |
Component ActivationThe component activation function is designed to generate activation signals to the tested components, such as activating lights, motors and other on-board electric equipments. (To Avoid burning out the component, Please refer to the specifification and parameter of component and then Set the OVERLOAD CURRENT VALUE) | Trailer Lights and Connection TestWhen the Probe is in Multimeter or SMART Test , Connect the Probe auxiliary ground lead to the trailer light, and insert the Probe Tip into the OBD socket to display the current voltage. | Following & Locating Short CircuitsIn most cases, a short circuit will appear as a blown fuse or a tripping of an electrical protection device (such as a circuit breaker tripping). | Screen SaverWhen receiving the product, be sure to tear off the screen protective film (the screen protective film is thin and difficult to find, please look for it carefully) |
SAFETY PRECAUTIONS AND WARNINGS
To prevent personal injury or damage to vehicles and/or the scan tool, read this user's manual first carefully and observe the following safety precautions at a minimum whenever working on a vehicle:
- Always perform automotive testing in a Safe Environment.
- Do not attempt to operate or observe the tool while driving a vehicle, Operating or observing the tool will cause driver distraction and could cause a fatal accident.
- Wear safety eye protection that meets ANSI standards.
- Keep clothing, hair, hands, tools, test equipment, etc. Away from all moving or hot engine parts.
- Operate the vehicle in a well-ventilated work area. Exhaust gases are poisonous.
- Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.
- Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.
- Put the transmission in P (for A/T) or N(M/T) and make sure the parking brake is engaged.
- Keep a fire extinguisher suitable for gasoline /chemical / electrical fires nearby.
- Don't connect or disconnect any test equipments while the ignition is ON or the engine is running.
- Keep the scan tool dry, clean free from oil/ water or grease. Use a mild detergent on a clean cloth to clean the outside of the scan tool when necessary.
- Our company is not responsible for any damage caused by unintentional or deliberate misuse of our products or tools.
You can add, text, html, images and videos as well to the tab from product settings area
Recently Viewed Products
Sleeve High Neck Bodycon Dress
$132.00
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nam fringilla augue nec est tristique auctor. Donec non est at libero.