PB100 Automotive Power Circuit Probe Tester, 12V 24V Car Test Light Electrical Diagnostic Tool Master Kit AC DC Digital Voltage Short Finder, Relay Fuse Tester Trailer 3 System Thermometer 4

$119.99

  • Brand: AutoMaximizer
  • Availability: In Stock
  • SKU: d518d55b-ed0d-4e4b-8f30-7d55895e9e8f
  • Barcode: 744759036049

【What is a PB100 Probe Tester?】With the PB100 probe tester, you can check voltage and ground signals in a typical DC circuit. However, the kicker is that you can also use it to send voltage and ground signals. It works like a test light that can power circuits or provide a good known ground. This way, you can effectively test...

Tags: Automotive , Diagnostic , Test & Measurement Tools , Thermometers , Tools & Equipment

  • 【What is a PB100 Probe Tester?】With the PB100 probe tester, you can check voltage and ground signals in a typical DC circuit. However, the kicker is that you can also use it to send voltage and ground signals. It works like a test light that can power circuits or provide a good known ground. This way, you can effectively test components and circuits without having to break out the old alligator clips and jumper wires. You can power or ground a circuit directly through the top of the device.
  • 【What does it do?】The PB100 is an essential tool for automobile user. It is needed for testing components on and off the vehicle, checking for the good and bad grounds, testing for continuity and diagnosing circuit failures. For example, you can use it to turn on a blower motor. You can run power window motors, windshield wipers, and even rear window defrosters. If the vehicle owner keeps it in his car he can check system failure on his own way no need to go to technician.
  • 【Easy to Use】ANCEL provides how-to guides and video tutorials to help you easily complete your repair work. With the press of a switch, you'll have an instant hot lead or ground lead. Use the probe tip and ground lead simultaneously to power up components right in your hand. Instantly check components for continuity as well as identify positive, negative and open circuits. Locate shorts without wasting fuses. 👉TIP: The probe is on the back of the device.
  • 【Voltage Indicator】The LED indicator on the front of the unit will show you the battery voltage when it is connected. You can use it to determine a whole range of things. You can even do a quick check of the alternator by plugging it in and starting the car. The voltage should go from about 12.6 volts to 14.0 volts. This is also useful if you have a situation where a power supply has a large voltage drop, if you notice low voltage on certain branches when checking fuses, etc.
  • 【Circuit Protection】The PB100 has a built-in 8-amp circuit breaker to prevent circuit overload and overheating. Unlike a normal test lamp, this device can conduct direct battery current into the circuit you touch with it. Any time you backfeed a circuit, you need to know what you are doing. The breaker will protect the circuit, but 8 amps is still enough to do a lot of damage with the wrong wire.
  • 【Trailer Wiring】A recurring source of frustration for technicians across the country, especially those who service trailers exposed to road salt or salt water. ​The PB100 Circuit Tester features a long 20-foot cable that allows you to make the initial connection directly to the vehicle's battery, while providing easy access to connect the trailer harness at the rear of the vehicle.
  • 【Accessory Replacement & Lifetime Warranty】If you lose the parts of your PB100, you can contact ANCEL customer service for a free replacement. We provides lifetime warranty, 60 Days No-Reason-asked Return for refund. And there is a technical support for timely and effectively solving the quality problem within 24 Hours.

Product Description

The test light has been the tool of choice for years when it comes to testing 12 V circuits. Although it is still needed today, there is something much better than a standard test light... Meet the PB100 Power Probe. In the automotive world, electrical circuits have become much more complex than in days gone by. The ANCEL PB100 is an essential tool for anyone looking to take their electrical diagnostics to the next level, simply because it offers the user more flexibility and convenience. This device will make your life easier without question. Why would not you want to check circuits quickly? All while getting things done faster and more accurately. For the money you spend, this device will pay for itself.

Product Properties:

  • DC voltage range: 0-65V; Resistance range: 0-100 kΩ; Rated current: 1-10 amps; Frequency response of sound passage: 0Hz to 10Khz.
  • Perform current injection, measurement, ground test, polarity test, continuity test and component activation.
  • Ergonomic housing design with waterproof, rugged, blow-molded housing, easy to handle and store.
  • There are 4 modes to diagnose the electrical systems.(DC voltage, AC voltage, Resistance, Diode)
  • AC- RMS, AC peak to peak, frequency and pulse width for signal testing.
  • High voltage capability: displays up to 60 volts, 0.1 volt resolution.
  • 8-amp circuit breaker, automatic reset, no button to press.
  • Three additional modes: MIN / MAX / audible monitoring.
  • Automatically detects positive, negative and open circuit.
  • Large color screen LCD with easy to navigate user menu.
  • Comes with an additional 20ft extension cable.
  • Find shorts to ground and to voltage.

More uses are worth your expectation!

  • Find The Short Circuits:In most cases, a short circuit will appear as a blown fuse or a tripping of an electrical protection device.Use the probe tip to activate and energize each of the fuse contacts..The contact which trips the circuit breaker is the shorted circuit.
  • Find The Bad Ground: Probe the suspected ground wire or contact with the probe tip. If the circuit breaker tripped, this circuit is more than likely a good ground.
  • Testing Trailer Lights: While the tool in DC Voltage mode, clip the auxiliary ground lead to the trailer ground , probe the contacts at the jack and then apply voltage to the probe tip. This lets you check the function and orientation of the connector and trailer lights.
  • Check Continuity: While the tool is in Resistance mode, using the probe tip with chassis is ground or the auxiliary ground lead, continuity can be tested on wires and components attached or disconnected from the vehicle’s electrical system.
  • Activating Component: The component activation function is designed to generate activation signals to the tested components, such as activating lights, motors and other on-board electric equipments.
  • Signal Circuit Testing: Once you extract a DTC from the vehicle and realize that troubleshooting begins with some kind of sensor circuit, there is a quick test you can perform to verify the code. Testing your sensor is easy while using the tool.
  • Voltage & Polarity Testing: While the tool is in DC Voltage mode, contact the probe tip to a POSITIVE circuit. If contact the probe tip to an OPEN circuit, neither of the LED will light.

Two power supply methods.

Powered by vehicle battery or cigarette lighter, Compared with other circuit testers that only use car battery power, PB100 provides more choices and is more convenient to use.

More data than a test lights.

Compared to the test light that only displays DC voltage, PB100 can also display AC voltage, resistance, and diode.

More functions than a multimeter.

Just choose the mode by pressing the mode button, and then contact the probe tip to a circuit, the LCD will read the DC/AV voltage, resistance.

What Do You Get?

  • 1 x PB100 Circuit Probe
  • 1 x Extension Cable (20ft)
  • 1 x Battery Hookup Clips
  • 1 x Cigarette Lighter Adapter
  • 1 x Protective Case
  • 1 x Probe tip
  • 1 x User's Manual

FAQs

Q: Where can I find the probe tip?

A: We keep the probe above the back of the device. (Warm note: Be more careful when operating because of the sharp probe tip.)

Q: Why can not the probe tip itself stay engaged? It keeps falling out.

A: You need to push it a little harder until you hear a "CLICK" sound, then it will stay engaged.

Q: Why should I buy an ANCEL PB100?

A: Our products are designed to help you save time and money in electrical diagnostics.

Q: Where can I find training videos?

A: You can learn by browsing the video on the page or the YouTube.

Q: Where can I buy replacement parts?

A: You do not need to purchase replacement parts, we will provide replacement parts free of charge.

Q: What do I do if my ANCEL PB100 is broken?

A: No need to return, we will send for a new product for you.

Test Voltage 12V 12V 12V 12V 12/24V
Application Check vehicle pipeline leaking Diagnose Engine System Diagnoses All-System for Most Trucks Check 12V Lead-acid Battery Test 12V Lead-acid Battery Test 12/24V Lead-acid Battery
4 Working Modes Air Mode & Smoke Mode、Overheat & Anti-frost Protection Read freeze frame data/Live data stream etc. 10 OBD-II Modes Test range: 100-1100CCA Test range: 100-2000CCA Test range: 100-2000CCA
Continuity Test/Activate Components/Voltage & Polarity Test Crankcase System Test/ Intake System Test/ Car Sealing Test I/M monitor Readiness test/EVAP system test Reads & Erases ENGINE / ABS / SRS / Transmission Trouble Codes Test regular flooded, AGM flat plate, AGM spiral, GEL battery Check battery health status Storage battery test,Maximum load system test
Trailer Lights & Connections/Signal Circuit Test Fuel Tank System Test/ Turbo Test/ Exhaust System Test Display battery voltage/Trip management/Performance test /HUD mode DPF Regeneration/Service Reset Battery standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB Cranking test and Charging test Engine system activation load test, Charging system test
Print Data EVAP System Test Three alarm tone/Exclusive free App/Vent magnetic mount Test result: SOH, SOC, CCA value, CCA rating, voltage, internal resistance, etc. Built-in thermal printer
Internet Update Flow Rate:<6 L/Min One-Click WIFI Update Designed with polarity reverses connection protection Battery standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB. Battery standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB.

You can add, text, html, images and videos as well to the tab from product settings area

Recently Viewed Products

$119.99