(Upgraded AD310) AD530 OBD2 Scanner Diagnostic Tool with Battery Test Car Engine Fault Code Reader Scan Tool, All OBD2 Function Enhanced Code Definition and Upgraded Graphing Battery Status
$97.72
🥇【2023 Upgrade 2-in-1 Car Diagnostic Scanner】ANCEL AD530 code reader is upgraded from AD310 in the actual fault detection of 300,000 cars. It can not only check the engine failure, and provide maintenance suggestions, but also a professional battery tester, which can check the health of the car battery. It is a real two-in-one car coder reader that has been tested...
Tags: Automotive , Code Readers & Scan Tools , Diagnostic , Test & Measurement Tools , Tools & Equipment
- 🥇【2023 Upgrade 2-in-1 Car Diagnostic Scanner】ANCEL AD530 code reader is upgraded from AD310 in the actual fault detection of 300,000 cars. It can not only check the engine failure, and provide maintenance suggestions, but also a professional battery tester, which can check the health of the car battery. It is a real two-in-one car coder reader that has been tested by the market. Owning AD530 is equivalent to owning AD310 and a professional battery tester at the same time.
- ✅【10 Full OBD2 Functions】ANCEL AD530 code reader Supports turns off Malfunction Indicator Lamp (MIL), reads/clears fault codes and resets monitor, graphs live data stream, displays freeze frame data, tests O2 sensor, EVAP System Test, I/M readiness status (emissions), tests advanced on-board monitoring, and retrieves vehicle information (VIN). In addition, this car code reader is equipped with the latest industrial chip, which makes the scanning speed 2X faster than other vehicle code readers.
- 🔋【Professional & Convenient Battery Test】ANCEL AD530 can check the real-time battery voltage, then refer to the voltage parameters in the system to compare. Finally display the test result in the form of text & graphic. Via the prompt of the interface and the changes in real-time voltage graphics, you can better know the battery health status or expected remaining life. The most surprising thing is that it is very convenient to check the battery in the cold winter without opening the cold hood.
- 🚗【advanced error code definition feature】 "i" key helps you understand the meaning of the code without the ability of an ordinary code reader. When you press the "i" key, you get accurate repair instructions instead of a bunch of technical terms you do not understand. You save yourself a trip to the mechanic and can decide if you can fix the problem yourself or need more advanced help, saving you money and time. Printout of fault codes with code definitions is also available.
- ✅Equipped with a 2.8-inch color TFT screen, upgraded to a more advanced STM 32-bit CPU, which features high speed and consistent performance compared to its competitors. Lifetime free software updates to fix the latest bugs or add new parameters. Download the software directly from the official ANCEL website, then follow the on-screen instructions to install it.
- 📈➤【Real-time data stream image display】ANCEL AD530 diagnostic scan tool can comprehensively diagnose data from your car, displaying graphical data streams: calculated load values, engine coolant temperature, intake manifold absolute pressure, vehicle speed, intake air temperature, air flow sensor, Barometric Pressure, Control Module Voltage, Fuel Rail Pressure, etc., Compared to other simple scanners, AD530 can understand the engine operating status more intuitily.
- 🔧【Humanized Design】+【5 YEARS WARRANTY】+【Lifetime Free Update】Equipped with a 2.8-inch color TFT screen, upgraded to a more advanced STM 32-bit CPU, which features high speed and consistent performance compared to its competitors. diagnostic scan tool provides 5 years warranty, Lifetime free software updates to fix the latest bugs or add new parameters. Any questions please feel free to contact us
Product Description
ANCEL AD530 OBD2 vehicle scanner is designed for both professional mechanics and home-use customers. It supports full OBD modes and it has a special battery tester function that allows you to monitor the real-time battery status. It supports lifetime free updates, and in fact, our technical team is constantly updating its database and software. You don't have to worry about its fluency, we use a new generation of 32 MB flash memory chips, equipped with our unique "Help" button to help you understand the complex professional vocabulary to ensure a pleasant user experience.
Works on most vehicles sold in the US with the model year of 1996 or newer.
Supports ALL OBDII protocols, including ISO9141, KWP2000, J1850 PWM, J1850 VPW and CAN.
Meanwhile, we have upgraded our products for the American market.
However, due to the complexity of the agreement of cars produced by car manufacturers, please e-mail us if you need confirmation.
Features
- Reads and displays DTCS(Diagnostic Trouble Code); Erases DTCS
- Reads live data stream
- Views freeze frame data
- O2 sensor test
- I/M monitor readiness test
- Displays On-board monitor test results
- Evap system test
- Retrieves vehicle information(VIN, CIN, and CVN)
- Reads, records & playbacks DTCs
- On-Screen live data graphing, Built-in code library
- Special functions:
- 1. Help function(“i” button)
- 2. BAT test (Real Time Battery Voltage)
- 3. The newest fault code database
- 4. Print DTCs report via PC
- 5. Feedback Function
- 6. Lifetime free update
EVAP TestThe EVAP test function lets you initiate a leak test for the vehicle's EVAP system. The OBD2 diagnostic tool does not perform the leak test, but signals to the vehicle's onboard computer to initiate the test. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test. | On-boarding Monitoring and O2 SensorMonitor the condition of the vehicle and check the status of the oxygen sensor in time. When O2 Sensor is Bad: Drastically worse gas mileage and performance; Rough running that doesn't improve after changing spark plugs and plug wires; Fouled spark plugs and an engine that runs rich (black smoke, carbon around the tailpipe). | I/M ReadinessDesigned with I/M readiness hot key, provides quick access to emissions readiness status, helps the engine run as efficiently as possible and also to produce as few emissions as possible | Live Data Stream and Freeze Frame DataLive data stream can show certain vehicle elements in real-time to monitor your vehicle status, such as engine RPM, speed, coolant temperature, voltage and so on. Freeze frame data can be either a single record of a certain set of operating conditions. It's a snapshot of whatever is wrong with your vehicle to help you fix your vehicle in time. |
DTC-Lookup and "i" - button
Not only explain the fault code, but also analyze the possible causes of the vehicle.
User - friendly "i" button lets you directly understand the meaning of the code without any hassle. Pressing the "i" button will give you accurate repair advice instead of a bunch of technical terms you don't understand. Our fault code base and software versions are permanently and continuously updated for free.
Upgraded Graphing Battery Test Function
Detect real-time data from 12V batteries and display battery graphs with fluctuations ranging from 8V to 18V. The discharge voltage of a normal battery is about 12V, the starting voltage is generally 7.5V-9.5V, and the charging voltage is about 14V. Our technical team recommends that you monitor your battery and replace it if the battery is not in good condition.
Compare with other regular code readers:
The improved battery detection function allows monitoring your vehicle battery automatically with reliable real-time graph data form instead of a direct result on the screen that an ordinary code reader does
Questions & Answers:
1. Why the Vehicle Linking Error?
Answer: Please verify that the ignition is ON. Check if the scan tool's connector is securely connected to the vehicle's DLC. Turn the engine off and wait for about 10 seconds and turn the engine back on and continue the test. Please make sure the control module is not damaged. Please update the latest software from ANCEL website.
2. Why does the tool not respond after it is inserted?
Answer: Connect it to the computer and check if the scanner is damaged. Check if the scan tool's connector is securely connected to the vehicle's DLC. Check if the DLC pins are bent or broken. Clean the DLC pins if necessary. Check vehicle battery to make sure it is still good with at least 8.0 volts.
3. Why the Scanner stop scanning?
In rare cases, the scanner might suddenly freeze. If the scan tool freezes, then an exception occurs or the vehicle's ECU is too slow to respond to requests.
Answer: Unplug the scanner, turn off the engine, wait for about 10 seconds, reinsert the scanner, restart the engine and continue the test.
4. Why would I want an OBDII scanner? After all, I can’t fix my car myself.
Answer: Having an OBDII scanner at home is helpful even for those who have no experience as a mechanic. By running the scanner, you can find error codes that give you an idea what’s wrong with the vehicle. You can then make an informed decision about whether the car needs to be taken to a mechanic immediately or if the problem can wait. Additionally, you’ll know whether the repair shop is treating you fairly regarding proposed repairs.
| Application | Test 12V Battery | Diagnose Engine system | Diagnose All Systems for VAG Vehicles | Test 12V Lead-acid Battery | Diagnose Engine/Transmission/ABS/SRS | Check Automotive Electrical System |
|---|---|---|---|---|---|---|
| OBD-II Modes Compatibility | 10 | 7 | 3 | Test range: 100-2000CCA | 10 | Powers by cigarette lighter or car battery |
| Read and Clear Codes / Retrieves Vehicle Information | ✓ | ✓ | ✓ | Analyze battery health, detect faults of starting and charging system | ✓ | 4 working modes: DC/AC voltage / Resistance/Diode |
| View Freeze Frame Data / Reads Live Data Stream / I/M Readiness Test | ✓ | ✓ | Quickly and accurately determine whether the battery is good or bad. | ✓ | Continuity test / Activate components / Voltage & polarity / Signal circuit test etc. | |
| Reads and Erases Engine / ABS / SRS Trouble Codes | Cranking test and Charging test | ✓ | Cranking test and Charging test | ✓ | Testing trailer lights and connections | |
| EVAP System / DTC Lookup | ✓ | Transmission / SAS / ESP / Battery Check / Immobilizer for VAG Vehicles | Battery standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB. | Read & Clear Transmission system error codes and turn off warning light | 8 Amp Circuit Breaker Protection | |
| Battery Test | ✓ | ✓ | DTC Definitions | |||
| Internet Update | ✓ | ✓ | ✓ | |||
| Advanced Functions | I/M Readiness/Print test data via PC/EVAP leak test | EVAP leak test | Oil Service Reset / TPS Replacement Reset / Electrical Park Brake (EPB) Reset | Print test data via PC | Print data | 20 feet extension cord |
You can add, text, html, images and videos as well to the tab from product settings area
Recently Viewed Products
Sleeve High Neck Bodycon Dress
$132.00
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nam fringilla augue nec est tristique auctor. Donec non est at libero.